Case

Position:
Home » Case
The heat removal method of solar street lights

The reason why solar street lights are widely used nowadays, in addition to the reasonable control of the cost of use, and the use of functional advantages, the most important thing is that the country has also begun to introduce many policies to support it, which can ensure the development of solar street lights. It went smoothly, and it became more popular in our lives, and it played a better role.

Do you know the difference between Solar Road Studs and Reflective Studs?

Solar Road Studs, also known as Solar Studs or solar road reflectors, is a kind of traffic safety. The warning light has amber, yellow, green, red, blue, white options. They are generally installed on roads or highways. It is used to indicate the direction of the road. Especially in rainy and foggy weather or when corners, the road contour can be better marked to remind the driver to pay attention to the driving route ahead. Solar Studs greatly reduces traffic accidents.

Precautions related to Road Studs installation

Road Studs mainly refers to a traffic safety facility. Protruding road signs with scientific names are mainly installed in the middle of the road markings or in the middle of the double yellow lines to remind the driver to drive in the lane through its retroreflective performance. The specification of Road Studs is generally 100mm*100mm*20mm, and the maximum height does not exceed 25mm. There are many kinds of reflector units, such as reflector, reflector beads, led light, reflective film, etc. The installation of Road Studs generally adopts epoxy resin installation. Road Studs can clearly outline the outline of the road with the help of car lights at night. Play a good visual inducing effect.

Professional Protruding Solar Road Studs Related Knowledge Is Here

Buried Solar Road Studs can be divided into buried type and protruding type according to different installation positions. The former is generally used in the center line, and the latter is generally used in the edge line. This is because the Solar Road Studs installed on the center line require particularly high pressure resistance. In order to solve this problem, the Solar Road Studs had to be buried in the ground, and only about 5 mm of the ground was exposed. The Solar Road Studs used on the edge line does not require particularly high pressure resistance, and it can still work effectively when it protrudes from the ground. Solar Road Studs can be divided into capacitive type and battery type according to different energy storage components. The service life of the former can reach five to seven years, and the service life of the latter generally ranges from one to three years.

Get to know Solar Road Studs again

solar road stud or solar road marker. It is a kind of road stud, set along the road surface, used at night or in rainy and foggy weather to indicate the direction of the road. It is composed of retroreflective materials, shells, solar panels, LEDs, and control devices. It has active luminous and passive reflective properties. The visual inducement facilities of the city are usually used in conjunction with markings. Edit this paragraph’s background The focus of expressway construction is gradually shifting to mountainous areas and mountainous areas with relatively lagging economic development. In mountainous expressways, the wind speed is significantly affected by mountains and valleys, with an average wind speed of only 1.2 m\/s, and wet and rainy weather conditions. Coupled with the lush forest environment, there is often fog in this section of the road.

When we are making solar street lights, we should pay attention to the safety issues of solar street lights

The solar street lamp power supply has only short-circuit and overload protection but no leakage protection. The reason for not using the leakage circuit breaker is to fall into a misunderstanding. Some believe that the three-phase leakage circuit breaker has a dead zone in action and cannot reliably protect the person from electric shock. It is better not to use it; some believe that the normal leakage current may cause the leakage circuit breaker Misoperation reduces the reliability of the power supply of solar street lights; some believe that there are irregularities in the installation of solar street lights, such as only drawing out the phase wire of solar street lights and borrowing the neutral wire from elsewhere, causing the leakage circuit breaker to fail to work normally.

PC Round Road Stud Diversified Applications

Road Studs have another advantage for garden steps: easy installation and daily operation, Road Studs can automatically open and close at dusk when the device opens, during the day, they close. The Road Stud is designed to withstand extremely high and low-temperature conditions.

PC LED Road Studs for Decoration

RUICHEN led solar stud has been widely used in the European Union, the United States, and other countries. For bike paths, parks, gardens, narrow bridges, piers, etc. bring good lighting effects.

RUICHEN Blue Road Studs On Urban Road

The device is called an aluminum solar studs lights, and the solar studs act as an indication of the road at night or in rain and fog, and alert vehicles to slow, safe driving.