Plastic Road Stud Embedded Type B2

Plastic Road Stud Features:

•High shock resistance, energy-saving, environment friendly.

•Automatically starts to work when night falls or with the onset of inclement weather.

•These aluminum alloy LED Road Studs are naturally charged by the sun.

•The LED lights of Road Studs come on automatically as soon as it starts getting dark every night.

•Cost effective, Road Studs easy to install and require absolutely no wires or maintenance.

•Dramatically enhances the look of your garden/yard/driveway.

•Specifically designed with road safety in mind and can help to prevent serious accidents and emit rather than reflect light.

•Pavement marker Road Stud accept OEM/ODM

Embedded Type Plastic Road Stud Parameters:

Application of Aluminum Road Studs B2:

♥Schools and hospitals

♥Highways

♥High traffic areas

♥Walking paths

♥Transit stations

♥Parks and campuses

♥Urban Road

Installation Method Of Embedded Road Stud:

• Carefully mark the distance between the placement of Road Studs. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill Φ108mm and depth will be 50mm.
• Remove all debris from the installation hole.
• Pour epoxy into the holes per the manufacturer’s instruction.
• Verify that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the plastic Road Stud shaft.
• Set the lighting surface of the Road Stud to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and solar marker shaft.
• After curing the LED Road Stud for 6-8 hours, remove the installation of the isolation facility.